YOUR VISIT£º HOMEPAGE PRODUCT CENTER FORGED SOCKET PIPE FITTINGS  SOCKET TEE AND CROSS  

 NAME£º SOCKET TEE
 MATERIAL£ºA234-WPB.A420-WPL6.A234-WP12.A234-WP11.A234-WP5.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L.
 SIZE£º1/8"-4"¡¢DN6-DN100
 PRESSURE GRADE£º3000LB¡¢6000LB¡¢9000LB¡¢Sch80¡¢Sch160¡¢XXS
 STANDARDS£º ISO, ANSI. JIS. DIN GB/T12459¡¢GB/T13401¡¢ASME B16.9¡¢SH3408 SH3409¡¢HG/T21635¡¢HG/T21631¡¢SY/T05010
 USE£º Petroleum, chemical, power, gas, metallurgy, shipbuilding, etc. 

SOCKET TEE PRODUCT CONSTRUCTION

 NAME£º SOCKET CROSS
 ²ÄÖÊ£º20¡¢A105¡¢304¡¢304L¡¢316¡¢316L¡¢CrMoµÈ
 ¹æ¸ñ£º1/8"-4"¡¢DN6-DN100
 PRESSURE£º3000LB¡¢6000LB¡¢9000LB¡¢Sch80¡¢Sch160¡¢XXS
 STANDARDS£º ISO, ANSI. JIS. DIN GB/T12459¡¢GB/T13401¡¢ASME B16.9¡¢SH3408 SH3409¡¢HG/T21635¡¢HG/T21631¡¢SY/T05010
 USE£º Petroleum, chemical, power, gas, metallurgy, shipbuilding, etc. 

SOCKET CROSS  PRODUCT CONSTRUCTION

Nominal Pipe
Size
Depth of Socket
Dimension of Socket

Wall Thickness

Center to Bottom of Socket
A
Cmin
Tees

Crosses
DN NPS Jmin d1 3000LB
Sch80
6000LB
Sch160
9000LB
XXS
3000LB
Sch80
6000LB
Sch160
9000LB
XXS
3000LB
Sch80
6000LB
Sch160
9000LB
XXS
6 1/8 10 10.7 3.2 3.5
-
11 11 - 11 11 -
8 1/4 10 14.1 3.3 4.0 - 11 15 - 11 15 -
10 3/8 10 17.5 3.5 4.4 - 13 15 - 13 15 -
15 1/2 10 21.8 4.1 5.2 8.2 16 19 25 16 19 25
20 3/4 13 27.4 4.3 6.1 8.6 19 22 28 19 22 28
25 1 13 34.2 5.0 7.0 10.0 22 27 32 22 27 32
32 11/4 13 42.9 5.3 7.0 10.6 27 32 35 27 32 35
40 11/2 13 48.3 5.6 7.8 11.2 32 38 38 32 38 38
50 2 13 61.1 6.1 9.5 12.2 38 41 41 38 41 41
65 21/2 16 76.9(73.8) 7.7 12.5 - 41 57 - 41 57 -
80 3 16 89.8 8.3 13.8
-
57 64 - 57 64 -
100 4 19 115.5 9.4 -
-
66 - - 66 - -

1¡¢WHAT ARE GIVEN IN THIS TABLE LIST ARE THE SAME PART SIZE OF VARIOUS SOCKET PIPE FITTINGS FOR CORRESPONDING STANDARDS.
2¡¢3000¡¢6000¡¢9000 ARE PRESSURE GRADE CODE, LB/in. IS THE UNIT. sch80¡¢sch160¡¢XXS ARE WALL THICKNESS CODE. 
3¡¢45¡ãELBOW AND 90¡ãELBOW ARE REDUCING, FLOW APERTURE DIMENSION d2 SMALLER THAN THE CORRESPONDING NOMINAL PIPE d2.
4¡¢WALL THICKNESS Cmin  IS THE MINIMUM OF ANY POINT¡£
5¡¢THE REDUCING PIPE FITTINGS: THE LENGTH A BETWEEN THE CENTER OF NARROW END AND  THE BOTTOM OF DIMENSION OF SOCKET EQUALS TO THE OPENER END A.
6¡¢ACCORDING TO THE CLIENTS' REQUIREMENT£¬ THE SOCKET PIPE FITTINGS ALSO CAN BE MADE WITH THREAD

PRESSURE GRADE TABLE OF THE SOCKET PIPE FITTINGS
THE WALL THICKNESS TABLE OF THE SMALL END DIAMETER
THE TABLE OF DIMENSION OF SOCKET
THE TOLERANCE LIMITS TABLE OF SOCKET PIPE FITTINGS
¡¡
 COPY RIGHT: HAITIAN PIPE FITTINGS CO.,LTD ,CHINA
SALE SITE£º DONGHE INDUSTRIAL AREA, MENGCUN HUI AUTONOMOUS COUNTY, CANGZHOU CITY, HEBEI PROVINCE, CHINA   ZIP£º061400
TEL£º86-317-5678500  86-317-5678501  FAX£º86-317-5678502¡¡ E-MAIL: SALE@PIPEFITTING.CC
HEBEI ICP , NO: 67823490